:tocdepth: 2

===============
Programming FAQ
===============

.. only:: html

   .. contents::

General Questions
=================

Is there a source code level debugger with breakpoints, single-stepping, etc.?
------------------------------------------------------------------------------

Yes.

Several debuggers for Python are described below, and the built-in function
:func:`breakpoint` allows you to drop into any of them.

The pdb module is a simple but adequate console-mode debugger for Python. It is
part of the standard Python library, and is :mod:`documented in the Library
Reference Manual <pdb>`. You can also write your own debugger by using the code
for pdb as an example.

The IDLE interactive development environment, which is part of the standard
Python distribution (normally available as Tools/scripts/idle), includes a
graphical debugger.

PythonWin is a Python IDE that includes a GUI debugger based on pdb.  The
Pythonwin debugger colors breakpoints and has quite a few cool features such as
debugging non-Pythonwin programs.  Pythonwin is available as part of the `Python
for Windows Extensions <https://sourceforge.net/projects/pywin32/>`__ project and
as a part of the ActivePython distribution (see
https://www.activestate.com/activepython\ ).

`Boa Constructor <http://boa-constructor.sourceforge.net/>`_ is an IDE and GUI
builder that uses wxWidgets.  It offers visual frame creation and manipulation,
an object inspector, many views on the source like object browsers, inheritance
hierarchies, doc string generated html documentation, an advanced debugger,
integrated help, and Zope support.

`Eric <http://eric-ide.python-projects.org/>`_ is an IDE built on PyQt
and the Scintilla editing component.

Pydb is a version of the standard Python debugger pdb, modified for use with DDD
(Data Display Debugger), a popular graphical debugger front end.  Pydb can be
found at http://bashdb.sourceforge.net/pydb/ and DDD can be found at
https://www.gnu.org/software/ddd.

There are a number of commercial Python IDEs that include graphical debuggers.
They include:

* Wing IDE (https://wingware.com/)
* Komodo IDE (https://komodoide.com/)
* PyCharm (https://www.jetbrains.com/pycharm/)


Is there a tool to help find bugs or perform static analysis?
-------------------------------------------------------------

Yes.

PyChecker is a static analysis tool that finds bugs in Python source code and
warns about code complexity and style.  You can get PyChecker from
http://pychecker.sourceforge.net/.

`Pylint <https://www.pylint.org/>`_ is another tool that checks
if a module satisfies a coding standard, and also makes it possible to write
plug-ins to add a custom feature.  In addition to the bug checking that
PyChecker performs, Pylint offers some additional features such as checking line
length, whether variable names are well-formed according to your coding
standard, whether declared interfaces are fully implemented, and more.
https://docs.pylint.org/ provides a full list of Pylint's features.

Static type checkers such as `Mypy <http://mypy-lang.org/>`_,
`Pyre <https://pyre-check.org/>`_, and
`Pytype <https://github.com/google/pytype>`_ can check type hints in Python
source code.


How can I create a stand-alone binary from a Python script?
-----------------------------------------------------------

You don't need the ability to compile Python to C code if all you want is a
stand-alone program that users can download and run without having to install
the Python distribution first.  There are a number of tools that determine the
set of modules required by a program and bind these modules together with a
Python binary to produce a single executable.

One is to use the freeze tool, which is included in the Python source tree as
``Tools/freeze``. It converts Python byte code to C arrays; a C compiler you can
embed all your modules into a new program, which is then linked with the
standard Python modules.

It works by scanning your source recursively for import statements (in both
forms) and looking for the modules in the standard Python path as well as in the
source directory (for built-in modules).  It then turns the bytecode for modules
written in Python into C code (array initializers that can be turned into code
objects using the marshal module) and creates a custom-made config file that
only contains those built-in modules which are actually used in the program.  It
then compiles the generated C code and links it with the rest of the Python
interpreter to form a self-contained binary which acts exactly like your script.

Obviously, freeze requires a C compiler.  There are several other utilities
which don't. One is Thomas Heller's py2exe (Windows only) at

    http://www.py2exe.org/

Another tool is Anthony Tuininga's `cx_Freeze <https://anthony-tuininga.github.io/cx_Freeze/>`_.


Are there coding standards or a style guide for Python programs?
----------------------------------------------------------------

Yes.  The coding style required for standard library modules is documented as
:pep:`8`.


Core Language
=============

Why am I getting an UnboundLocalError when the variable has a value?
--------------------------------------------------------------------

It can be a surprise to get the UnboundLocalError in previously working
code when it is modified by adding an assignment statement somewhere in
the body of a function.

This code:

   >>> x = 10
   >>> def bar():
   ...     print(x)
   >>> bar()
   10

works, but this code:

   >>> x = 10
   >>> def foo():
   ...     print(x)
   ...     x += 1

results in an UnboundLocalError:

   >>> foo()
   Traceback (most recent call last):
     ...
   UnboundLocalError: local variable 'x' referenced before assignment

This is because when you make an assignment to a variable in a scope, that
variable becomes local to that scope and shadows any similarly named variable
in the outer scope.  Since the last statement in foo assigns a new value to
``x``, the compiler recognizes it as a local variable.  Consequently when the
earlier ``print(x)`` attempts to print the uninitialized local variable and
an error results.

In the example above you can access the outer scope variable by declaring it
global:

   >>> x = 10
   >>> def foobar():
   ...     global x
   ...     print(x)
   ...     x += 1
   >>> foobar()
   10

This explicit declaration is required in order to remind you that (unlike the
superficially analogous situation with class and instance variables) you are
actually modifying the value of the variable in the outer scope:

   >>> print(x)
   11

You can do a similar thing in a nested scope using the :keyword:`nonlocal`
keyword:

   >>> def foo():
   ...    x = 10
   ...    def bar():
   ...        nonlocal x
   ...        print(x)
   ...        x += 1
   ...    bar()
   ...    print(x)
   >>> foo()
   10
   11


What are the rules for local and global variables in Python?
------------------------------------------------------------

In Python, variables that are only referenced inside a function are implicitly
global.  If a variable is assigned a value anywhere within the function's body,
it's assumed to be a local unless explicitly declared as global.

Though a bit surprising at first, a moment's consideration explains this.  On
one hand, requiring :keyword:`global` for assigned variables provides a bar
against unintended side-effects.  On the other hand, if ``global`` was required
for all global references, you'd be using ``global`` all the time.  You'd have
to declare as global every reference to a built-in function or to a component of
an imported module.  This clutter would defeat the usefulness of the ``global``
declaration for identifying side-effects.


Why do lambdas defined in a loop with different values all return the same result?
----------------------------------------------------------------------------------

Assume you use a for loop to define a few different lambdas (or even plain
functions), e.g.::

   >>> squares = []
   >>> for x in range(5):
   ...     squares.append(lambda: x**2)

This gives you a list that contains 5 lambdas that calculate ``x**2``.  You
might expect that, when called, they would return, respectively, ``0``, ``1``,
``4``, ``9``, and ``16``.  However, when you actually try you will see that
they all return ``16``::

   >>> squares[2]()
   16
   >>> squares[4]()
   16

This happens because ``x`` is not local to the lambdas, but is defined in
the outer scope, and it is accessed when the lambda is called --- not when it
is defined.  At the end of the loop, the value of ``x`` is ``4``, so all the
functions now return ``4**2``, i.e. ``16``.  You can also verify this by
changing the value of ``x`` and see how the results of the lambdas change::

   >>> x = 8
   >>> squares[2]()
   64

In order to avoid this, you need to save the values in variables local to the
lambdas, so that they don't rely on the value of the global ``x``::

   >>> squares = []
   >>> for x in range(5):
   ...     squares.append(lambda n=x: n**2)

Here, ``n=x`` creates a new variable ``n`` local to the lambda and computed
when the lambda is defined so that it has the same value that ``x`` had at
that point in the loop.  This means that the value of ``n`` will be ``0``
in the first lambda, ``1`` in the second, ``2`` in the third, and so on.
Therefore each lambda will now return the correct result::

   >>> squares[2]()
   4
   >>> squares[4]()
   16

Note that this behaviour is not peculiar to lambdas, but applies to regular
functions too.


How do I share global variables across modules?
------------------------------------------------

The canonical way to share information across modules within a single program is
to create a special module (often called config or cfg).  Just import the config
module in all modules of your application; the module then becomes available as
a global name.  Because there is only one instance of each module, any changes
made to the module object get reflected everywhere.  For example:

config.py::

   x = 0   # Default value of the 'x' configuration setting

mod.py::

   import config
   config.x = 1

main.py::

   import config
   import mod
   print(config.x)

Note that using a module is also the basis for implementing the Singleton design
pattern, for the same reason.


What are the "best practices" for using import in a module?
-----------------------------------------------------------

In general, don't use ``from modulename import *``.  Doing so clutters the
importer's namespace, and makes it much harder for linters to detect undefined
names.

Import modules at the top of a file.  Doing so makes it clear what other modules
your code requires and avoids questions of whether the module name is in scope.
Using one import per line makes it easy to add and delete module imports, but
using multiple imports per line uses less screen space.

It's good practice if you import modules in the following order:

1. standard library modules -- e.g. ``sys``, ``os``, ``getopt``, ``re``
2. third-party library modules (anything installed in Python's site-packages
   directory) -- e.g. mx.DateTime, ZODB, PIL.Image, etc.
3. locally-developed modules

It is sometimes necessary to move imports to a function or class to avoid
problems with circular imports.  Gordon McMillan says:

   Circular imports are fine where both modules use the "import <module>" form
   of import.  They fail when the 2nd module wants to grab a name out of the
   first ("from module import name") and the import is at the top level.  That's
   because names in the 1st are not yet available, because the first module is
   busy importing the 2nd.

In this case, if the second module is only used in one function, then the import
can easily be moved into that function.  By the time the import is called, the
first module will have finished initializing, and the second module can do its
import.

It may also be necessary to move imports out of the top level of code if some of
the modules are platform-specific.  In that case, it may not even be possible to
import all of the modules at the top of the file.  In this case, importing the
correct modules in the corresponding platform-specific code is a good option.

Only move imports into a local scope, such as inside a function definition, if
it's necessary to solve a problem such as avoiding a circular import or are
trying to reduce the initialization time of a module.  This technique is
especially helpful if many of the imports are unnecessary depending on how the
program executes.  You may also want to move imports into a function if the
modules are only ever used in that function.  Note that loading a module the
first time may be expensive because of the one time initialization of the
module, but loading a module multiple times is virtually free, costing only a
couple of dictionary lookups.  Even if the module name has gone out of scope,
the module is probably available in :data:`sys.modules`.


Why are default values shared between objects?
----------------------------------------------

This type of bug commonly bites neophyte programmers.  Consider this function::

   def foo(mydict={}):  # Danger: shared reference to one dict for all calls
       ... compute something ...
       mydict[key] = value
       return mydict

The first time you call this function, ``mydict`` contains a single item.  The
second time, ``mydict`` contains two items because when ``foo()`` begins
executing, ``mydict`` starts out with an item already in it.

It is often expected that a function call creates new objects for default
values. This is not what happens. Default values are created exactly once, when
the function is defined.  If that object is changed, like the dictionary in this
example, subsequent calls to the function will refer to this changed object.

By definition, immutable objects such as numbers, strings, tuples, and ``None``,
are safe from change. Changes to mutable objects such as dictionaries, lists,
and class instances can lead to confusion.

Because of this feature, it is good programming practice to not use mutable
objects as default values.  Instead, use ``None`` as the default value and
inside the function, check if the parameter is ``None`` and create a new
list/dictionary/whatever if it is.  For example, don't write::

   def foo(mydict={}):
       ...

but::

   def foo(mydict=None):
       if mydict is None:
           mydict = {}  # create a new dict for local namespace

This feature can be useful.  When you have a function that's time-consuming to
compute, a common technique is to cache the parameters and the resulting value
of each call to the function, and return the cached value if the same value is
requested again.  This is called "memoizing", and can be implemented like this::

   # Callers can only provide two parameters and optionally pass _cache by keyword
   def expensive(arg1, arg2, *, _cache={}):
       if (arg1, arg2) in _cache:
           return _cache[(arg1, arg2)]

       # Calculate the value
       result = ... expensive computation ...
       _cache[(arg1, arg2)] = result           # Store result in the cache
       return result

You could use a global variable containing a dictionary instead of the default
value; it's a matter of taste.


How can I pass optional or keyword parameters from one function to another?
---------------------------------------------------------------------------

Collect the arguments using the ``*`` and ``**`` specifiers in the function's
parameter list; this gives you the positional arguments as a tuple and the
keyword arguments as a dictionary.  You can then pass these arguments when
calling another function by using ``*`` and ``**``::

   def f(x, *args, **kwargs):
       ...
       kwargs['width'] = '14.3c'
       ...
       g(x, *args, **kwargs)


.. index::
   single: argument; difference from parameter
   single: parameter; difference from argument

.. _faq-argument-vs-parameter:

What is the difference between arguments and parameters?
--------------------------------------------------------

:term:`Parameters <parameter>` are defined by the names that appear in a
function definition, whereas :term:`arguments <argument>` are the values
actually passed to a function when calling it.  Parameters define what types of
arguments a function can accept.  For example, given the function definition::

   def func(foo, bar=None, **kwargs):
       pass

*foo*, *bar* and *kwargs* are parameters of ``func``.  However, when calling
``func``, for example::

   func(42, bar=314, extra=somevar)

the values ``42``, ``314``, and ``somevar`` are arguments.


Why did changing list 'y' also change list 'x'?
------------------------------------------------

If you wrote code like::

   >>> x = []
   >>> y = x
   >>> y.append(10)
   >>> y
   [10]
   >>> x
   [10]

you might be wondering why appending an element to ``y`` changed ``x`` too.

There are two factors that produce this result:

1) Variables are simply names that refer to objects.  Doing ``y = x`` doesn't
   create a copy of the list -- it creates a new variable ``y`` that refers to
   the same object ``x`` refers to.  This means that there is only one object
   (the list), and both ``x`` and ``y`` refer to it.
2) Lists are :term:`mutable`, which means that you can change their content.

After the call to :meth:`~list.append`, the content of the mutable object has
changed from ``[]`` to ``[10]``.  Since both the variables refer to the same
object, using either name accesses the modified value ``[10]``.

If we instead assign an immutable object to ``x``::

   >>> x = 5  # ints are immutable
   >>> y = x
   >>> x = x + 1  # 5 can't be mutated, we are creating a new object here
   >>> x
   6
   >>> y
   5

we can see that in this case ``x`` and ``y`` are not equal anymore.  This is
because integers are :term:`immutable`, and when we do ``x = x + 1`` we are not
mutating the int ``5`` by incrementing its value; instead, we are creating a
new object (the int ``6``) and assigning it to ``x`` (that is, changing which
object ``x`` refers to).  After this assignment we have two objects (the ints
``6`` and ``5``) and two variables that refer to them (``x`` now refers to
``6`` but ``y`` still refers to ``5``).

Some operations (for example ``y.append(10)`` and ``y.sort()``) mutate the
object, whereas superficially similar operations (for example ``y = y + [10]``
and ``sorted(y)``) create a new object.  In general in Python (and in all cases
in the standard library) a method that mutates an object will return ``None``
to help avoid getting the two types of operations confused.  So if you
mistakenly write ``y.sort()`` thinking it will give you a sorted copy of ``y``,
you'll instead end up with ``None``, which will likely cause your program to
generate an easily diagnosed error.

However, there is one class of operations where the same operation sometimes
has different behaviors with different types:  the augmented assignment
operators.  For example, ``+=`` mutates lists but not tuples or ints (``a_list
+= [1, 2, 3]`` is equivalent to ``a_list.extend([1, 2, 3])`` and mutates
``a_list``, whereas ``some_tuple += (1, 2, 3)`` and ``some_int += 1`` create
new objects).

In other words:

* If we have a mutable object (:class:`list`, :class:`dict`, :class:`set`,
  etc.), we can use some specific operations to mutate it and all the variables
  that refer to it will see the change.
* If we have an immutable object (:class:`str`, :class:`int`, :class:`tuple`,
  etc.), all the variables that refer to it will always see the same value,
  but operations that transform that value into a new value always return a new
  object.

If you want to know if two variables refer to the same object or not, you can
use the :keyword:`is` operator, or the built-in function :func:`id`.


How do I write a function with output parameters (call by reference)?
---------------------------------------------------------------------

Remember that arguments are passed by assignment in Python.  Since assignment
just creates references to objects, there's no alias between an argument name in
the caller and callee, and so no call-by-reference per se.  You can achieve the
desired effect in a number of ways.

1) By returning a tuple of the results::

      >>> def func1(a, b):
      ...     a = 'new-value'        # a and b are local names
      ...     b = b + 1              # assigned to new objects
      ...     return a, b            # return new values
      ...
      >>> x, y = 'old-value', 99
      >>> func1(x, y)
      ('new-value', 100)

   This is almost always the clearest solution.

2) By using global variables.  This isn't thread-safe, and is not recommended.

3) By passing a mutable (changeable in-place) object::

      >>> def func2(a):
      ...     a[0] = 'new-value'     # 'a' references a mutable list
      ...     a[1] = a[1] + 1        # changes a shared object
      ...
      >>> args = ['old-value', 99]
      >>> func2(args)
      >>> args
      ['new-value', 100]

4) By passing in a dictionary that gets mutated::

      >>> def func3(args):
      ...     args['a'] = 'new-value'     # args is a mutable dictionary
      ...     args['b'] = args['b'] + 1   # change it in-place
      ...
      >>> args = {'a': 'old-value', 'b': 99}
      >>> func3(args)
      >>> args
      {'a': 'new-value', 'b': 100}

5) Or bundle up values in a class instance::

      >>> class Namespace:
      ...     def __init__(self, /, **args):
      ...         for key, value in args.items():
      ...             setattr(self, key, value)
      ...
      >>> def func4(args):
      ...     args.a = 'new-value'        # args is a mutable Namespace
      ...     args.b = args.b + 1         # change object in-place
      ...
      >>> args = Namespace(a='old-value', b=99)
      >>> func4(args)
      >>> vars(args)
      {'a': 'new-value', 'b': 100}


   There's almost never a good reason to get this complicated.

Your best choice is to return a tuple containing the multiple results.


How do you make a higher order function in Python?
--------------------------------------------------

You have two choices: you can use nested scopes or you can use callable objects.
For example, suppose you wanted to define ``linear(a,b)`` which returns a
function ``f(x)`` that computes the value ``a*x+b``.  Using nested scopes::

   def linear(a, b):
       def result(x):
           return a * x + b
       return result

Or using a callable object::

   class linear:

       def __init__(self, a, b):
           self.a, self.b = a, b

       def __call__(self, x):
           return self.a * x + self.b

In both cases, ::

   taxes = linear(0.3, 2)

gives a callable object where ``taxes(10e6) == 0.3 * 10e6 + 2``.

The callable object approach has the disadvantage that it is a bit slower and
results in slightly longer code.  However, note that a collection of callables
can share their signature via inheritance::

   class exponential(linear):
       # __init__ inherited
       def __call__(self, x):
           return self.a * (x ** self.b)

Object can encapsulate state for several methods::

   class counter:

       value = 0

       def set(self, x):
           self.value = x

       def up(self):
           self.value = self.value + 1

       def down(self):
           self.value = self.value - 1

   count = counter()
   inc, dec, reset = count.up, count.down, count.set

Here ``inc()``, ``dec()`` and ``reset()`` act like functions which share the
same counting variable.


How do I copy an object in Python?
----------------------------------

In general, try :func:`copy.copy` or :func:`copy.deepcopy` for the general case.
Not all objects can be copied, but most can.

Some objects can be copied more easily.  Dictionaries have a :meth:`~dict.copy`
method::

   newdict = olddict.copy()

Sequences can be copied by slicing::

   new_l = l[:]


How can I find the methods or attributes of an object?
------------------------------------------------------

For an instance x of a user-defined class, ``dir(x)`` returns an alphabetized
list of the names containing the instance attributes and methods and attributes
defined by its class.


How can my code discover the name of an object?
-----------------------------------------------

Generally speaking, it can't, because objects don't really have names.
Essentially, assignment always binds a name to a value; the same is true of
``def`` and ``class`` statements, but in that case the value is a
callable. Consider the following code::

   >>> class A:
   ...     pass
   ...
   >>> B = A
   >>> a = B()
   >>> b = a
   >>> print(b)
   <__main__.A object at 0x16D07CC>
   >>> print(a)
   <__main__.A object at 0x16D07CC>

Arguably the class has a name: even though it is bound to two names and invoked
through the name B the created instance is still reported as an instance of
class A.  However, it is impossible to say whether the instance's name is a or
b, since both names are bound to the same value.

Generally speaking it should not be necessary for your code to "know the names"
of particular values. Unless you are deliberately writing introspective
programs, this is usually an indication that a change of approach might be
beneficial.

In comp.lang.python, Fredrik Lundh once gave an excellent analogy in answer to
this question:

   The same way as you get the name of that cat you found on your porch: the cat
   (object) itself cannot tell you its name, and it doesn't really care -- so
   the only way to find out what it's called is to ask all your neighbours
   (namespaces) if it's their cat (object)...

   ....and don't be surprised if you'll find that it's known by many names, or
   no name at all!


What's up with the comma operator's precedence?
-----------------------------------------------

Comma is not an operator in Python.  Consider this session::

    >>> "a" in "b", "a"
    (False, 'a')

Since the comma is not an operator, but a separator between expressions the
above is evaluated as if you had entered::

    ("a" in "b"), "a"

not::

    "a" in ("b", "a")

The same is true of the various assignment operators (``=``, ``+=`` etc).  They
are not truly operators but syntactic delimiters in assignment statements.


Is there an equivalent of C's "?:" ternary operator?
----------------------------------------------------

Yes, there is. The syntax is as follows::

   [on_true] if [expression] else [on_false]

   x, y = 50, 25
   small = x if x < y else y

Before this syntax was introduced in Python 2.5, a common idiom was to use
logical operators::

   [expression] and [on_true] or [on_false]

However, this idiom is unsafe, as it can give wrong results when *on_true*
has a false boolean value.  Therefore, it is always better to use
the ``... if ... else ...`` form.


Is it possible to write obfuscated one-liners in Python?
--------------------------------------------------------

Yes.  Usually this is done by nesting :keyword:`lambda` within
:keyword:`!lambda`.  See the following three examples, due to Ulf Bartelt::

   from functools import reduce

   # Primes < 1000
   print(list(filter(None,map(lambda y:y*reduce(lambda x,y:x*y!=0,
   map(lambda x,y=y:y%x,range(2,int(pow(y,0.5)+1))),1),range(2,1000)))))

   # First 10 Fibonacci numbers
   print(list(map(lambda x,f=lambda x,f:(f(x-1,f)+f(x-2,f)) if x>1 else 1:
   f(x,f), range(10))))

   # Mandelbrot set
   print((lambda Ru,Ro,Iu,Io,IM,Sx,Sy:reduce(lambda x,y:x+y,map(lambda y,
   Iu=Iu,Io=Io,Ru=Ru,Ro=Ro,Sy=Sy,L=lambda yc,Iu=Iu,Io=Io,Ru=Ru,Ro=Ro,i=IM,
   Sx=Sx,Sy=Sy:reduce(lambda x,y:x+y,map(lambda x,xc=Ru,yc=yc,Ru=Ru,Ro=Ro,
   i=i,Sx=Sx,F=lambda xc,yc,x,y,k,f=lambda xc,yc,x,y,k,f:(k<=0)or (x*x+y*y
   >=4.0) or 1+f(xc,yc,x*x-y*y+xc,2.0*x*y+yc,k-1,f):f(xc,yc,x,y,k,f):chr(
   64+F(Ru+x*(Ro-Ru)/Sx,yc,0,0,i)),range(Sx))):L(Iu+y*(Io-Iu)/Sy),range(Sy
   ))))(-2.1, 0.7, -1.2, 1.2, 30, 80, 24))
   #    \___ ___/  \___ ___/  |   |   |__ lines on screen
   #        V          V      |   |______ columns on screen
   #        |          |      |__________ maximum of "iterations"
   #        |          |_________________ range on y axis
   #        |____________________________ range on x axis

Don't try this at home, kids!


.. _faq-positional-only-arguments:

What does the slash(/) in the parameter list of a function mean?
----------------------------------------------------------------

A slash in the argument list of a function denotes that the parameters prior to
it are positional-only.  Positional-only parameters are the ones without an
externally-usable name.  Upon calling a function that accepts positional-only
parameters, arguments are mapped to parameters based solely on their position.
For example, :func:`divmod` is a function that accepts positional-only
parameters. Its documentation looks like this::

   >>> help(divmod)
   Help on built-in function divmod in module builtins:

   divmod(x, y, /)
       Return the tuple (x//y, x%y).  Invariant: div*y + mod == x.

The slash at the end of the parameter list means that both parameters are
positional-only. Thus, calling :func:`divmod` with keyword arguments would lead
to an error::

   >>> divmod(x=3, y=4)
   Traceback (most recent call last):
     File "<stdin>", line 1, in <module>
   TypeError: divmod() takes no keyword arguments


Numbers and strings
===================

How do I specify hexadecimal and octal integers?
------------------------------------------------

To specify an octal digit, precede the octal value with a zero, and then a lower
or uppercase "o".  For example, to set the variable "a" to the octal value "10"
(8 in decimal), type::

   >>> a = 0o10
   >>> a
   8

Hexadecimal is just as easy.  Simply precede the hexadecimal number with a zero,
and then a lower or uppercase "x".  Hexadecimal digits can be specified in lower
or uppercase.  For example, in the Python interpreter::

   >>> a = 0xa5
   >>> a
   165
   >>> b = 0XB2
   >>> b
   178


Why does -22 // 10 return -3?
-----------------------------

It's primarily driven by the desire that ``i % j`` have the same sign as ``j``.
If you want that, and also want::

    i == (i // j) * j + (i % j)

then integer division has to return the floor.  C also requires that identity to
hold, and then compilers that truncate ``i // j`` need to make ``i % j`` have
the same sign as ``i``.

There are few real use cases for ``i % j`` when ``j`` is negative.  When ``j``
is positive, there are many, and in virtually all of them it's more useful for
``i % j`` to be ``>= 0``.  If the clock says 10 now, what did it say 200 hours
ago?  ``-190 % 12 == 2`` is useful; ``-190 % 12 == -10`` is a bug waiting to
bite.


How do I convert a string to a number?
--------------------------------------

For integers, use the built-in :func:`int` type constructor, e.g. ``int('144')
== 144``.  Similarly, :func:`float` converts to floating-point,
e.g. ``float('144') == 144.0``.

By default, these interpret the number as decimal, so that ``int('0144') ==
144`` holds true, and ``int('0x144')`` raises :exc:`ValueError`. ``int(string,
base)`` takes the base to convert from as a second optional argument, so ``int(
'0x144', 16) == 324``.  If the base is specified as 0, the number is interpreted
using Python's rules: a leading '0o' indicates octal, and '0x' indicates a hex
number.

Do not use the built-in function :func:`eval` if all you need is to convert
strings to numbers.  :func:`eval` will be significantly slower and it presents a
security risk: someone could pass you a Python expression that might have
unwanted side effects.  For example, someone could pass
``__import__('os').system("rm -rf $HOME")`` which would erase your home
directory.

:func:`eval` also has the effect of interpreting numbers as Python expressions,
so that e.g. ``eval('09')`` gives a syntax error because Python does not allow
leading '0' in a decimal number (except '0').


How do I convert a number to a string?
--------------------------------------

To convert, e.g., the number 144 to the string '144', use the built-in type
constructor :func:`str`.  If you want a hexadecimal or octal representation, use
the built-in functions :func:`hex` or :func:`oct`.  For fancy formatting, see
the :ref:`f-strings` and :ref:`formatstrings` sections,
e.g. ``"{:04d}".format(144)`` yields
``'0144'`` and ``"{:.3f}".format(1.0/3.0)`` yields ``'0.333'``.


How do I modify a string in place?
----------------------------------

You can't, because strings are immutable.  In most situations, you should
simply construct a new string from the various parts you want to assemble
it from.  However, if you need an object with the ability to modify in-place
unicode data, try using an :class:`io.StringIO` object or the :mod:`array`
module::

   >>> import io
   >>> s = "Hello, world"
   >>> sio = io.StringIO(s)
   >>> sio.getvalue()
   'Hello, world'
   >>> sio.seek(7)
   7
   >>> sio.write("there!")
   6
   >>> sio.getvalue()
   'Hello, there!'

   >>> import array
   >>> a = array.array('u', s)
   >>> print(a)
   array('u', 'Hello, world')
   >>> a[0] = 'y'
   >>> print(a)
   array('u', 'yello, world')
   >>> a.tounicode()
   'yello, world'


How do I use strings to call functions/methods?
-----------------------------------------------

There are various techniques.

* The best is to use a dictionary that maps strings to functions.  The primary
  advantage of this technique is that the strings do not need to match the names
  of the functions.  This is also the primary technique used to emulate a case
  construct::

     def a():
         pass

     def b():
         pass

     dispatch = {'go': a, 'stop': b}  # Note lack of parens for funcs

     dispatch[get_input()]()  # Note trailing parens to call function

* Use the built-in function :func:`getattr`::

     import foo
     getattr(foo, 'bar')()

  Note that :func:`getattr` works on any object, including classes, class
  instances, modules, and so on.

  This is used in several places in the standard library, like this::

     class Foo:
         def do_foo(self):
             ...

         def do_bar(self):
             ...

     f = getattr(foo_instance, 'do_' + opname)
     f()


* Use :func:`locals` or :func:`eval` to resolve the function name::

     def myFunc():
         print("hello")

     fname = "myFunc"

     f = locals()[fname]
     f()

     f = eval(fname)
     f()

  Note: Using :func:`eval` is slow and dangerous.  If you don't have absolute
  control over the contents of the string, someone could pass a string that
  resulted in an arbitrary function being executed.

Is there an equivalent to Perl's chomp() for removing trailing newlines from strings?
-------------------------------------------------------------------------------------

You can use ``S.rstrip("\r\n")`` to remove all occurrences of any line
terminator from the end of the string ``S`` without removing other trailing
whitespace.  If the string ``S`` represents more than one line, with several
empty lines at the end, the line terminators for all the blank lines will
be removed::

   >>> lines = ("line 1 \r\n"
   ...          "\r\n"
   ...          "\r\n")
   >>> lines.rstrip("\n\r")
   'line 1 '

Since this is typically only desired when reading text one line at a time, using
``S.rstrip()`` this way works well.


Is there a scanf() or sscanf() equivalent?
------------------------------------------

Not as such.

For simple input parsing, the easiest approach is usually to split the line into
whitespace-delimited words using the :meth:`~str.split` method of string objects
and then convert decimal strings to numeric values using :func:`int` or
:func:`float`.  ``split()`` supports an optional "sep" parameter which is useful
if the line uses something other than whitespace as a separator.

For more complicated input parsing, regular expressions are more powerful
than C's :c:func:`sscanf` and better suited for the task.


What does 'UnicodeDecodeError' or 'UnicodeEncodeError' error  mean?
-------------------------------------------------------------------

See the :ref:`unicode-howto`.


Performance
===========

My program is too slow. How do I speed it up?
---------------------------------------------

That's a tough one, in general.  First, here are a list of things to
remember before diving further:

* Performance characteristics vary across Python implementations.  This FAQ
  focuses on :term:`CPython`.
* Behaviour can vary across operating systems, especially when talking about
  I/O or multi-threading.
* You should always find the hot spots in your program *before* attempting to
  optimize any code (see the :mod:`profile` module).
* Writing benchmark scripts will allow you to iterate quickly when searching
  for improvements (see the :mod:`timeit` module).
* It is highly recommended to have good code coverage (through unit testing
  or any other technique) before potentially introducing regressions hidden
  in sophisticated optimizations.

That being said, there are many tricks to speed up Python code.  Here are
some general principles which go a long way towards reaching acceptable
performance levels:

* Making your algorithms faster (or changing to faster ones) can yield
  much larger benefits than trying to sprinkle micro-optimization tricks
  all over your code.

* Use the right data structures.  Study documentation for the :ref:`bltin-types`
  and the :mod:`collections` module.

* When the standard library provides a primitive for doing something, it is
  likely (although not guaranteed) to be faster than any alternative you
  may come up with.  This is doubly true for primitives written in C, such
  as builtins and some extension types.  For example, be sure to use
  either the :meth:`list.sort` built-in method or the related :func:`sorted`
  function to do sorting (and see the :ref:`sortinghowto` for examples
  of moderately advanced usage).

* Abstractions tend to create indirections and force the interpreter to work
  more.  If the levels of indirection outweigh the amount of useful work
  done, your program will be slower.  You should avoid excessive abstraction,
  especially under the form of tiny functions or methods (which are also often
  detrimental to readability).

If you have reached the limit of what pure Python can allow, there are tools
to take you further away.  For example, `Cython <http://cython.org>`_ can
compile a slightly modified version of Python code into a C extension, and
can be used on many different platforms.  Cython can take advantage of
compilation (and optional type annotations) to make your code significantly
faster than when interpreted.  If you are confident in your C programming
skills, you can also :ref:`write a C extension module <extending-index>`
yourself.

.. seealso::
   The wiki page devoted to `performance tips
   <https://wiki.python.org/moin/PythonSpeed/PerformanceTips>`_.

.. _efficient_string_concatenation:

What is the most efficient way to concatenate many strings together?
--------------------------------------------------------------------

:class:`str` and :class:`bytes` objects are immutable, therefore concatenating
many strings together is inefficient as each concatenation creates a new
object.  In the general case, the total runtime cost is quadratic in the
total string length.

To accumulate many :class:`str` objects, the recommended idiom is to place
them into a list and call :meth:`str.join` at the end::

   chunks = []
   for s in my_strings:
       chunks.append(s)
   result = ''.join(chunks)

(another reasonably efficient idiom is to use :class:`io.StringIO`)

To accumulate many :class:`bytes` objects, the recommended idiom is to extend
a :class:`bytearray` object using in-place concatenation (the ``+=`` operator)::

   result = bytearray()
   for b in my_bytes_objects:
       result += b


Sequences (Tuples/Lists)
========================

How do I convert between tuples and lists?
------------------------------------------

The type constructor ``tuple(seq)`` converts any sequence (actually, any
iterable) into a tuple with the same items in the same order.

For example, ``tuple([1, 2, 3])`` yields ``(1, 2, 3)`` and ``tuple('abc')``
yields ``('a', 'b', 'c')``.  If the argument is a tuple, it does not make a copy
but returns the same object, so it is cheap to call :func:`tuple` when you
aren't sure that an object is already a tuple.

The type constructor ``list(seq)`` converts any sequence or iterable into a list
with the same items in the same order.  For example, ``list((1, 2, 3))`` yields
``[1, 2, 3]`` and ``list('abc')`` yields ``['a', 'b', 'c']``.  If the argument
is a list, it makes a copy just like ``seq[:]`` would.


What's a negative index?
------------------------

Python sequences are indexed with positive numbers and negative numbers.  For
positive numbers 0 is the first index 1 is the second index and so forth.  For
negative indices -1 is the last index and -2 is the penultimate (next to last)
index and so forth.  Think of ``seq[-n]`` as the same as ``seq[len(seq)-n]``.

Using negative indices can be very convenient.  For example ``S[:-1]`` is all of
the string except for its last character, which is useful for removing the
trailing newline from a string.


How do I iterate over a sequence in reverse order?
--------------------------------------------------

Use the :func:`reversed` built-in function, which is new in Python 2.4::

   for x in reversed(sequence):
       ...  # do something with x ...

This won't touch your original sequence, but build a new copy with reversed
order to iterate over.

With Python 2.3, you can use an extended slice syntax::

   for x in sequence[::-1]:
       ...  # do something with x ...


How do you remove duplicates from a list?
-----------------------------------------

See the Python Cookbook for a long discussion of many ways to do this:

   https://code.activestate.com/recipes/52560/

If you don't mind reordering the list, sort it and then scan from the end of the
list, deleting duplicates as you go::

   if mylist:
       mylist.sort()
       last = mylist[-1]
       for i in range(len(mylist)-2, -1, -1):
           if last == mylist[i]:
               del mylist[i]
           else:
               last = mylist[i]

If all elements of the list may be used as set keys (i.e. they are all
:term:`hashable`) this is often faster ::

   mylist = list(set(mylist))

This converts the list into a set, thereby removing duplicates, and then back
into a list.


How do you make an array in Python?
-----------------------------------

Use a list::

   ["this", 1, "is", "an", "array"]

Lists are equivalent to C or Pascal arrays in their time complexity; the primary
difference is that a Python list can contain objects of many different types.

The ``array`` module also provides methods for creating arrays of fixed types
with compact representations, but they are slower to index than lists.  Also
note that the Numeric extensions and others define array-like structures with
various characteristics as well.

To get Lisp-style linked lists, you can emulate cons cells using tuples::

   lisp_list = ("like",  ("this",  ("example", None) ) )

If mutability is desired, you could use lists instead of tuples.  Here the
analogue of lisp car is ``lisp_list[0]`` and the analogue of cdr is
``lisp_list[1]``.  Only do this if you're sure you really need to, because it's
usually a lot slower than using Python lists.


.. _faq-multidimensional-list:

How do I create a multidimensional list?
----------------------------------------

You probably tried to make a multidimensional array like this::

   >>> A = [[None] * 2] * 3

This looks correct if you print it:

.. testsetup::

   A = [[None] * 2] * 3

.. doctest::

   >>> A
   [[None, None], [None, None], [None, None]]

But when you assign a value, it shows up in multiple places:

.. testsetup::

   A = [[None] * 2] * 3

.. doctest::

   >>> A[0][0] = 5
   >>> A
   [[5, None], [5, None], [5, None]]

The reason is that replicating a list with ``*`` doesn't create copies, it only
creates references to the existing objects.  The ``*3`` creates a list
containing 3 references to the same list of length two.  Changes to one row will
show in all rows, which is almost certainly not what you want.

The suggested approach is to create a list of the desired length first and then
fill in each element with a newly created list::

   A = [None] * 3
   for i in range(3):
       A[i] = [None] * 2

This generates a list containing 3 different lists of length two.  You can also
use a list comprehension::

   w, h = 2, 3
   A = [[None] * w for i in range(h)]

Or, you can use an extension that provides a matrix datatype; `NumPy
<http://www.numpy.org/>`_ is the best known.


How do I apply a method to a sequence of objects?
-------------------------------------------------

Use a list comprehension::

   result = [obj.method() for obj in mylist]

.. _faq-augmented-assignment-tuple-error:

Why does a_tuple[i] += ['item'] raise an exception when the addition works?
---------------------------------------------------------------------------

This is because of a combination of the fact that augmented assignment
operators are *assignment* operators, and the difference between mutable and
immutable objects in Python.

This discussion applies in general when augmented assignment operators are
applied to elements of a tuple that point to mutable objects, but we'll use
a ``list`` and ``+=`` as our exemplar.

If you wrote::

   >>> a_tuple = (1, 2)
   >>> a_tuple[0] += 1
   Traceback (most recent call last):
      ...
   TypeError: 'tuple' object does not support item assignment

The reason for the exception should be immediately clear: ``1`` is added to the
object ``a_tuple[0]`` points to (``1``), producing the result object, ``2``,
but when we attempt to assign the result of the computation, ``2``, to element
``0`` of the tuple, we get an error because we can't change what an element of
a tuple points to.

Under the covers, what this augmented assignment statement is doing is
approximately this::

   >>> result = a_tuple[0] + 1
   >>> a_tuple[0] = result
   Traceback (most recent call last):
     ...
   TypeError: 'tuple' object does not support item assignment

It is the assignment part of the operation that produces the error, since a
tuple is immutable.

When you write something like::

   >>> a_tuple = (['foo'], 'bar')
   >>> a_tuple[0] += ['item']
   Traceback (most recent call last):
     ...
   TypeError: 'tuple' object does not support item assignment

The exception is a bit more surprising, and even more surprising is the fact
that even though there was an error, the append worked::

    >>> a_tuple[0]
    ['foo', 'item']

To see why this happens, you need to know that (a) if an object implements an
``__iadd__`` magic method, it gets called when the ``+=`` augmented assignment
is executed, and its return value is what gets used in the assignment statement;
and (b) for lists, ``__iadd__`` is equivalent to calling ``extend`` on the list
and returning the list.  That's why we say that for lists, ``+=`` is a
"shorthand" for ``list.extend``::

    >>> a_list = []
    >>> a_list += [1]
    >>> a_list
    [1]

This is equivalent to::

    >>> result = a_list.__iadd__([1])
    >>> a_list = result

The object pointed to by a_list has been mutated, and the pointer to the
mutated object is assigned back to ``a_list``.  The end result of the
assignment is a no-op, since it is a pointer to the same object that ``a_list``
was previously pointing to, but the assignment still happens.

Thus, in our tuple example what is happening is equivalent to::

   >>> result = a_tuple[0].__iadd__(['item'])
   >>> a_tuple[0] = result
   Traceback (most recent call last):
     ...
   TypeError: 'tuple' object does not support item assignment

The ``__iadd__`` succeeds, and thus the list is extended, but even though
``result`` points to the same object that ``a_tuple[0]`` already points to,
that final assignment still results in an error, because tuples are immutable.


I want to do a complicated sort: can you do a Schwartzian Transform in Python?
------------------------------------------------------------------------------

The technique, attributed to Randal Schwartz of the Perl community, sorts the
elements of a list by a metric which maps each element to its "sort value". In
Python, use the ``key`` argument for the :meth:`list.sort` method::

   Isorted = L[:]
   Isorted.sort(key=lambda s: int(s[10:15]))


How can I sort one list by values from another list?
----------------------------------------------------

Merge them into an iterator of tuples, sort the resulting list, and then pick
out the element you want. ::

   >>> list1 = ["what", "I'm", "sorting", "by"]
   >>> list2 = ["something", "else", "to", "sort"]
   >>> pairs = zip(list1, list2)
   >>> pairs = sorted(pairs)
   >>> pairs
   [("I'm", 'else'), ('by', 'sort'), ('sorting', 'to'), ('what', 'something')]
   >>> result = [x[1] for x in pairs]
   >>> result
   ['else', 'sort', 'to', 'something']


An alternative for the last step is::

   >>> result = []
   >>> for p in pairs: result.append(p[1])

If you find this more legible, you might prefer to use this instead of the final
list comprehension.  However, it is almost twice as slow for long lists.  Why?
First, the ``append()`` operation has to reallocate memory, and while it uses
some tricks to avoid doing that each time, it still has to do it occasionally,
and that costs quite a bit.  Second, the expression "result.append" requires an
extra attribute lookup, and third, there's a speed reduction from having to make
all those function calls.


Objects
=======

What is a class?
----------------

A class is the particular object type created by executing a class statement.
Class objects are used as templates to create instance objects, which embody
both the data (attributes) and code (methods) specific to a datatype.

A class can be based on one or more other classes, called its base class(es). It
then inherits the attributes and methods of its base classes. This allows an
object model to be successively refined by inheritance.  You might have a
generic ``Mailbox`` class that provides basic accessor methods for a mailbox,
and subclasses such as ``MboxMailbox``, ``MaildirMailbox``, ``OutlookMailbox``
that handle various specific mailbox formats.


What is a method?
-----------------

A method is a function on some object ``x`` that you normally call as
``x.name(arguments...)``.  Methods are defined as functions inside the class
definition::

   class C:
       def meth(self, arg):
           return arg * 2 + self.attribute


What is self?
-------------

Self is merely a conventional name for the first argument of a method.  A method
defined as ``meth(self, a, b, c)`` should be called as ``x.meth(a, b, c)`` for
some instance ``x`` of the class in which the definition occurs; the called
method will think it is called as ``meth(x, a, b, c)``.

See also :ref:`why-self`.


How do I check if an object is an instance of a given class or of a subclass of it?
-----------------------------------------------------------------------------------

Use the built-in function ``isinstance(obj, cls)``.  You can check if an object
is an instance of any of a number of classes by providing a tuple instead of a
single class, e.g. ``isinstance(obj, (class1, class2, ...))``, and can also
check whether an object is one of Python's built-in types, e.g.
``isinstance(obj, str)`` or ``isinstance(obj, (int, float, complex))``.

Note that most programs do not use :func:`isinstance` on user-defined classes
very often.  If you are developing the classes yourself, a more proper
object-oriented style is to define methods on the classes that encapsulate a
particular behaviour, instead of checking the object's class and doing a
different thing based on what class it is.  For example, if you have a function
that does something::

   def search(obj):
       if isinstance(obj, Mailbox):
           ...  # code to search a mailbox
       elif isinstance(obj, Document):
           ...  # code to search a document
       elif ...

A better approach is to define a ``search()`` method on all the classes and just
call it::

   class Mailbox:
       def search(self):
           ...  # code to search a mailbox

   class Document:
       def search(self):
           ...  # code to search a document

   obj.search()


What is delegation?
-------------------

Delegation is an object oriented technique (also called a design pattern).
Let's say you have an object ``x`` and want to change the behaviour of just one
of its methods.  You can create a new class that provides a new implementation
of the method you're interested in changing and delegates all other methods to
the corresponding method of ``x``.

Python programmers can easily implement delegation.  For example, the following
class implements a class that behaves like a file but converts all written data
to uppercase::

   class UpperOut:

       def __init__(self, outfile):
           self._outfile = outfile

       def write(self, s):
           self._outfile.write(s.upper())

       def __getattr__(self, name):
           return getattr(self._outfile, name)

Here the ``UpperOut`` class redefines the ``write()`` method to convert the
argument string to uppercase before calling the underlying
``self._outfile.write()`` method.  All other methods are delegated to the
underlying ``self._outfile`` object.  The delegation is accomplished via the
``__getattr__`` method; consult :ref:`the language reference <attribute-access>`
for more information about controlling attribute access.

Note that for more general cases delegation can get trickier. When attributes
must be set as well as retrieved, the class must define a :meth:`__setattr__`
method too, and it must do so carefully.  The basic implementation of
:meth:`__setattr__` is roughly equivalent to the following::

   class X:
       ...
       def __setattr__(self, name, value):
           self.__dict__[name] = value
       ...

Most :meth:`__setattr__` implementations must modify ``self.__dict__`` to store
local state for self without causing an infinite recursion.


How do I call a method defined in a base class from a derived class that overrides it?
--------------------------------------------------------------------------------------

Use the built-in :func:`super` function::

   class Derived(Base):
       def meth(self):
           super(Derived, self).meth()

For version prior to 3.0, you may be using classic classes: For a class
definition such as ``class Derived(Base): ...`` you can call method ``meth()``
defined in ``Base`` (or one of ``Base``'s base classes) as ``Base.meth(self,
arguments...)``.  Here, ``Base.meth`` is an unbound method, so you need to
provide the ``self`` argument.


How can I organize my code to make it easier to change the base class?
----------------------------------------------------------------------

You could define an alias for the base class, assign the real base class to it
before your class definition, and use the alias throughout your class.  Then all
you have to change is the value assigned to the alias.  Incidentally, this trick
is also handy if you want to decide dynamically (e.g. depending on availability
of resources) which base class to use.  Example::

   BaseAlias = <real base class>

   class Derived(BaseAlias):
       def meth(self):
           BaseAlias.meth(self)
           ...


How do I create static class data and static class methods?
-----------------------------------------------------------

Both static data and static methods (in the sense of C++ or Java) are supported
in Python.

For static data, simply define a class attribute.  To assign a new value to the
attribute, you have to explicitly use the class name in the assignment::

   class C:
       count = 0   # number of times C.__init__ called

       def __init__(self):
           C.count = C.count + 1

       def getcount(self):
           return C.count  # or return self.count

``c.count`` also refers to ``C.count`` for any ``c`` such that ``isinstance(c,
C)`` holds, unless overridden by ``c`` itself or by some class on the base-class
search path from ``c.__class__`` back to ``C``.

Caution: within a method of C, an assignment like ``self.count = 42`` creates a
new and unrelated instance named "count" in ``self``'s own dict.  Rebinding of a
class-static data name must always specify the class whether inside a method or
not::

   C.count = 314

Static methods are possible::

   class C:
       @staticmethod
       def static(arg1, arg2, arg3):
           # No 'self' parameter!
           ...

However, a far more straightforward way to get the effect of a static method is
via a simple module-level function::

   def getcount():
       return C.count

If your code is structured so as to define one class (or tightly related class
hierarchy) per module, this supplies the desired encapsulation.


How can I overload constructors (or methods) in Python?
-------------------------------------------------------

This answer actually applies to all methods, but the question usually comes up
first in the context of constructors.

In C++ you'd write

.. code-block:: c

    class C {
        C() { cout << "No arguments\n"; }
        C(int i) { cout << "Argument is " << i << "\n"; }
    }

In Python you have to write a single constructor that catches all cases using
default arguments.  For example::

   class C:
       def __init__(self, i=None):
           if i is None:
               print("No arguments")
           else:
               print("Argument is", i)

This is not entirely equivalent, but close enough in practice.

You could also try a variable-length argument list, e.g. ::

   def __init__(self, *args):
       ...

The same approach works for all method definitions.


I try to use __spam and I get an error about _SomeClassName__spam.
------------------------------------------------------------------

Variable names with double leading underscores are "mangled" to provide a simple
but effective way to define class private variables.  Any identifier of the form
``__spam`` (at least two leading underscores, at most one trailing underscore)
is textually replaced with ``_classname__spam``, where ``classname`` is the
current class name with any leading underscores stripped.

This doesn't guarantee privacy: an outside user can still deliberately access
the "_classname__spam" attribute, and private values are visible in the object's
``__dict__``.  Many Python programmers never bother to use private variable
names at all.


My class defines __del__ but it is not called when I delete the object.
-----------------------------------------------------------------------

There are several possible reasons for this.

The del statement does not necessarily call :meth:`__del__` -- it simply
decrements the object's reference count, and if this reaches zero
:meth:`__del__` is called.

If your data structures contain circular links (e.g. a tree where each child has
a parent reference and each parent has a list of children) the reference counts
will never go back to zero.  Once in a while Python runs an algorithm to detect
such cycles, but the garbage collector might run some time after the last
reference to your data structure vanishes, so your :meth:`__del__` method may be
called at an inconvenient and random time. This is inconvenient if you're trying
to reproduce a problem. Worse, the order in which object's :meth:`__del__`
methods are executed is arbitrary.  You can run :func:`gc.collect` to force a
collection, but there *are* pathological cases where objects will never be
collected.

Despite the cycle collector, it's still a good idea to define an explicit
``close()`` method on objects to be called whenever you're done with them.  The
``close()`` method can then remove attributes that refer to subobjects.  Don't
call :meth:`__del__` directly -- :meth:`__del__` should call ``close()`` and
``close()`` should make sure that it can be called more than once for the same
object.

Another way to avoid cyclical references is to use the :mod:`weakref` module,
which allows you to point to objects without incrementing their reference count.
Tree data structures, for instance, should use weak references for their parent
and sibling references (if they need them!).

.. XXX relevant for Python 3?

   If the object has ever been a local variable in a function that caught an
   expression in an except clause, chances are that a reference to the object
   still exists in that function's stack frame as contained in the stack trace.
   Normally, calling :func:`sys.exc_clear` will take care of this by clearing
   the last recorded exception.

Finally, if your :meth:`__del__` method raises an exception, a warning message
is printed to :data:`sys.stderr`.


How do I get a list of all instances of a given class?
------------------------------------------------------

Python does not keep track of all instances of a class (or of a built-in type).
You can program the class's constructor to keep track of all instances by
keeping a list of weak references to each instance.


Why does the result of ``id()`` appear to be not unique?
--------------------------------------------------------

The :func:`id` builtin returns an integer that is guaranteed to be unique during
the lifetime of the object.  Since in CPython, this is the object's memory
address, it happens frequently that after an object is deleted from memory, the
next freshly created object is allocated at the same position in memory.  This
is illustrated by this example:

>>> id(1000) # doctest: +SKIP
13901272
>>> id(2000) # doctest: +SKIP
13901272

The two ids belong to different integer objects that are created before, and
deleted immediately after execution of the ``id()`` call.  To be sure that
objects whose id you want to examine are still alive, create another reference
to the object:

>>> a = 1000; b = 2000
>>> id(a) # doctest: +SKIP
13901272
>>> id(b) # doctest: +SKIP
13891296


Modules
=======

How do I create a .pyc file?
----------------------------

When a module is imported for the first time (or when the source file has
changed since the current compiled file was created) a ``.pyc`` file containing
the compiled code should be created in a ``__pycache__`` subdirectory of the
directory containing the ``.py`` file.  The ``.pyc`` file will have a
filename that starts with the same name as the ``.py`` file, and ends with
``.pyc``, with a middle component that depends on the particular ``python``
binary that created it.  (See :pep:`3147` for details.)

One reason that a ``.pyc`` file may not be created is a permissions problem
with the directory containing the source file, meaning that the ``__pycache__``
subdirectory cannot be created. This can happen, for example, if you develop as
one user but run as another, such as if you are testing with a web server.

Unless the :envvar:`PYTHONDONTWRITEBYTECODE` environment variable is set,
creation of a .pyc file is automatic if you're importing a module and Python
has the ability (permissions, free space, etc...) to create a ``__pycache__``
subdirectory and write the compiled module to that subdirectory.

Running Python on a top level script is not considered an import and no
``.pyc`` will be created.  For example, if you have a top-level module
``foo.py`` that imports another module ``xyz.py``, when you run ``foo`` (by
typing ``python foo.py`` as a shell command), a ``.pyc`` will be created for
``xyz`` because ``xyz`` is imported, but no ``.pyc`` file will be created for
``foo`` since ``foo.py`` isn't being imported.

If you need to create a ``.pyc`` file for ``foo`` -- that is, to create a
``.pyc`` file for a module that is not imported -- you can, using the
:mod:`py_compile` and :mod:`compileall` modules.

The :mod:`py_compile` module can manually compile any module.  One way is to use
the ``compile()`` function in that module interactively::

   >>> import py_compile
   >>> py_compile.compile('foo.py')                 # doctest: +SKIP

This will write the ``.pyc`` to a ``__pycache__`` subdirectory in the same
location as ``foo.py`` (or you can override that with the optional parameter
``cfile``).

You can also automatically compile all files in a directory or directories using
the :mod:`compileall` module.  You can do it from the shell prompt by running
``compileall.py`` and providing the path of a directory containing Python files
to compile::

       python -m compileall .


How do I find the current module name?
--------------------------------------

A module can find out its own module name by looking at the predefined global
variable ``__name__``.  If this has the value ``'__main__'``, the program is
running as a script.  Many modules that are usually used by importing them also
provide a command-line interface or a self-test, and only execute this code
after checking ``__name__``::

   def main():
       print('Running test...')
       ...

   if __name__ == '__main__':
       main()


How can I have modules that mutually import each other?
-------------------------------------------------------

Suppose you have the following modules:

foo.py::

   from bar import bar_var
   foo_var = 1

bar.py::

   from foo import foo_var
   bar_var = 2

The problem is that the interpreter will perform the following steps:

* main imports foo
* Empty globals for foo are created
* foo is compiled and starts executing
* foo imports bar
* Empty globals for bar are created
* bar is compiled and starts executing
* bar imports foo (which is a no-op since there already is a module named foo)
* bar.foo_var = foo.foo_var

The last step fails, because Python isn't done with interpreting ``foo`` yet and
the global symbol dictionary for ``foo`` is still empty.

The same thing happens when you use ``import foo``, and then try to access
``foo.foo_var`` in global code.

There are (at least) three possible workarounds for this problem.

Guido van Rossum recommends avoiding all uses of ``from <module> import ...``,
and placing all code inside functions.  Initializations of global variables and
class variables should use constants or built-in functions only.  This means
everything from an imported module is referenced as ``<module>.<name>``.

Jim Roskind suggests performing steps in the following order in each module:

* exports (globals, functions, and classes that don't need imported base
  classes)
* ``import`` statements
* active code (including globals that are initialized from imported values).

van Rossum doesn't like this approach much because the imports appear in a
strange place, but it does work.

Matthias Urlichs recommends restructuring your code so that the recursive import
is not necessary in the first place.

These solutions are not mutually exclusive.


__import__('x.y.z') returns <module 'x'>; how do I get z?
---------------------------------------------------------

Consider using the convenience function :func:`~importlib.import_module` from
:mod:`importlib` instead::

   z = importlib.import_module('x.y.z')


When I edit an imported module and reimport it, the changes don't show up.  Why does this happen?
-------------------------------------------------------------------------------------------------

For reasons of efficiency as well as consistency, Python only reads the module
file on the first time a module is imported.  If it didn't, in a program
consisting of many modules where each one imports the same basic module, the
basic module would be parsed and re-parsed many times.  To force re-reading of a
changed module, do this::

   import importlib
   import modname
   importlib.reload(modname)

Warning: this technique is not 100% fool-proof.  In particular, modules
containing statements like ::

   from modname import some_objects

will continue to work with the old version of the imported objects.  If the
module contains class definitions, existing class instances will *not* be
updated to use the new class definition.  This can result in the following
paradoxical behaviour::

   >>> import importlib
   >>> import cls
   >>> c = cls.C()                # Create an instance of C
   >>> importlib.reload(cls)
   <module 'cls' from 'cls.py'>
   >>> isinstance(c, cls.C)       # isinstance is false?!?
   False

The nature of the problem is made clear if you print out the "identity" of the
class objects::

   >>> hex(id(c.__class__))
   '0x7352a0'
   >>> hex(id(cls.C))
   '0x4198d0'
